LG GBB72NSDXN, Owner'S Manual

Page: 30 / 861

30
EN
Symptoms Reason&Solution
It is difficult to open
the appliance door.
Did you open the door right after you closed it?
• If you try to open the appliance door within one minute after you closed
it, you may have difficulties because of the pressure inside the
appliance. Try to open the appliance door again in a few minutes so
that the internal pressure stabilizes.
There is condensation
inside the appliance
or on the bottom of
the vegetable drawer
cover.
Did you store hot food without cooling it first?
•
Cool the hot food first before putting it in the fridge or freezer
compartment.
Did you leave the appliance door open?
•
Although the condensation will disappear soon after you close the
appliance door, you can wipe it with a dry cloth.
Do you open and close the appliance door too frequently?
• Condensation can form due to the temperature difference from the
outside. Wipe out the dampness with a dry cloth.
Did you put warm or moist food inside without sealing it in a
container?
• Store food in a covered or sealed container.
Frosts has formed in
the freezer
compartment.
Doors may not be closed properly?
•
Check if the food item inside the appliance is blocking the door and
make sure that the door is tightly closed.
Did you store hot food without cooling it first?
•
Cool the hot food first before putting it in the fridge or freezer
compartment.
Frosts has formed in
the freezer
compartment.
Is the air entry or exit of the freezer compartment blocked?
• Make sure that air entry or exit is not blocked so that the air can
circulate inside.
Is the freezer compartment overfilled?
• Maintain an appropriate space between items.
Frost or condensation
has formed inside or
outside the appliance.
Did you open and close the appliance door frequently or is the
appliance door improperly closed?
•
Frosts or condensation can form if the outside air penetrates inside the
appliance.
Is the installation environment humid?
•
Condensation can appear on the exterior of the appliance if the
installation area is too humid or on a humid day such as a rainy day.
Wipe off any moisture with a dry cloth.