LG FWV696SSE Page 52 Owner'S Manual Download

Page: 52 / 60

TROUBLESHOOTING

Noises You Might Hear

FROZEN FAILURE

Is supply/drain hose or drain pump frozen?

• Supply warm water into the drum in order to unfreeze the

drain hose and the drain pump. Cover the supply hose with

wet and warm towel.

WATER LEAKAGE

Water leaks.

• Call for service.

POWER FAILURE

The appliance experienced a mains power failure.

• Restart the cycle.

dHE

DRY ERROR

Drying functions only are not working.

• Call for service.

Symptoms

Possible Cause & Solution

Rattling and

clanking noise

Foreign objects, such as keys, coins, or safety pins may be

in the drum.

• Stop the appliance, check the drum for foreign objects. If

the noise continues after the appliance is restarted, call for

service.

Thumping sound

Heavy clothes may produce a thumping sound. This is

usually normal.

• If the sound continues, the appliance is probably out of

balance. Stop and redistribute the clothes.

The clothes may be out of balance.

• Pause the programme and redistribute the clothes after

the door unlocks.

Symptoms

Possible Cause & Solution

global_main.book.book Page 52 Wednesday, September 2, 2020 4:40 PM

Summary of Contents for FWV696SSE





























































Search results

Summary of Contents for FWV696SSE

Reviews:

Related manuals for FWV696SSE

Brands by name

Popular brands

LG FWV696SSE, Owner'S Manual

Search results

Summary of Contents for FWV696SSE

Reviews:

Related manuals for FWV696SSE

Brands by name

Popular brands