background image

17

INSTALLATION

ENGLISH

Connecting the Hose to the 

Appliance

Screw the supply hose to the water inlet valve on 

the back of the appliance.

•  Do not connect the hose to the hot water supply 

for models with one water inlet. Connect to the 

cold water supply only.

NOTE

•  After completing connection, if water leaks from 

the hose, repeat the same steps. Use the most 

conventional type of tap for the water supply. In 

case that the tap is square or too big, remove the 

guide plate before inserting the tap into the 

adaptor.

•  Make sure that the hose should not be kinked or 

trapped.

Installing the Drain Hose

Installing the Drain Hose with 

the Elbow Bracket

The drain hose should not be placed higher than 

100 cm

 above the floor. Water in the appliance may 

not drain or may drain slowly.

•  Securing the drain hose correctly will protect the 

floor from damage due to water leakage.

•  If the drain hose is too long, do not force it back 

into the appliance. This will cause abnormal 

noise.

•  When installing the drain hose to a sink, secure it 

tightly with string.

   105 cm

global_main.book.book  Page 17  Tuesday, February 22, 2022  1:47 PM

Summary of Contents for FV1411S2B

















































Reviews: