LG FS15GP F Series, Owner'S Manual, Page: 25 / 180

25
EN EN
Checking air condition on the
Status Display
You can check the overall air quality and
dust/odor(gas) concentration on the Status
display of the product.
•
Overall air quality : Overall air quality
can be seen by the color of the air
quality indicator and the text indicating
the dust concentration and odor(gas)
concentration.
•
Dust concentration : The dust
concentration is indicated with the color
displayed with specific figures, depending
on particle size. Displays the dust
concentration of PM10/PM2.5/PM1.0.
•
Odor(Gas) concentration
: You
can check through the odor(gas)
concentration text and color of the status
display.
NOTE
•
The color of overall air quality is
determined based on the worst
condition among dust concentration and
odor(gas) concentration.
•
Dust concentration is displayed in
units of 1 from 4 to 999. For dust
concentration, refer to the sensor
manufacturer's data sheet.
•
The fine dust/ultra-fine dust
concentration displayed on the product
may be different from the measurement
standards of other instruments and
other products.
–
If the dust concentration is high, the
difference between the displayed
dust concentration and the actual
dust concentration may be large.
•
Temperature and humidity may
vary depending on the surrounding
environment, such as doorways,
windows, and vents.
•
Temperature and humidity may
appear differently depending on air
circulation in the same room. Also,
the temperature and humidity may
be different from other products and
thermo-hygrometers.
•
If different or identical products are
used in the same space, there may
be differences in the concentration
readings due to air circulation.
•
Unlike odor (gas), fine dust spreads
slowly, delaying the time when dust
concentration is measured.
•
If the product is used in the following
environments, the dust concentration
may be displayed differently from the
actual value.
–
Around fabric sofas and beds,
around deep pile carpets, when
shaking out blankets/ clothes, when
using a vacuum cleaner, in places
with bugs and pets, or places with
high humidity.
–
Places where outside air enters,
such as around construction sites,
roadsides, factories, doorways,
windows, and ventilation openings
–
Places where products that generate
steam and fine particles (humidifiers,
cooking utensils, sprays, etc.) are
used.
–
Even if dust is generated by activity
such as dusting or cleaning, the
sensor may not respond if large dust
of PM10 or higher is generated, but
the dust is removed by the filter.
•
The odor (gas) concentration can be
changed by products that cause odor
(gas), such as air fresheners, odor
remover, cleaning agents, cosmetics,
perfumes, etc.
•
The odor (gas) sensor will not stabilize
until two minutes after starting driving.
During the stabilization time, the odor
(gas) concentration is not reflected in
the overall air quality.