LG Fridge freezer, Owner'S Manual

Page: 167 / 170

18
1. Loosely release the screws ❶ , ❸
of the hinge on the case part of
the refrigerator and then separate
the door by pushing it to the right
(See Figure 20).
2. Release the screws No. ❶ , ❸
completely and then fix them
loosely to the reverse side (See
Figure 21)
3. Loosen the screws ❷ and ❹
fixed to the door to disconnect
the hinge.
4. Move the separated hinges
(Figure 24) diagonally and fix it to
the door by turning the hinge by
180°. Fix the hinge to the door
with screws No.
❷ , ❹ .
5. Align the door hinge with screws
No. ❶ , ❸ on the case and push
from left to right to lock in.
6. Adjust the up/down or the
left/right interval of the
refrigerator door so that leaning
should not occur to either side,
and then tighten screws.
7. After fixing the hinge, insert the
screw caps ⑮ (two spots) at the
opposite holes of the hinge.
※
Perform work for changing the door before installation.
6. Procedure to install
6) Changing the opening direction of the refrigerator door
1
2
(Figure 20)
(Figure 21)