LG Fridge freezer, Owner'S Manual

Page: 162 / 170

13
10. Place the paper jig ⑨ on the reference line of the paper jig at the rear side of the
furniture door. (See Figure 7)
※ ※ Reference
- Place the reference line of the paper jig at 1595mm from the floor of the cabinet.
- If the integrated door panel is long, place the reference line of the paper jig at
1595mm plus ‘A’ from the floor of the furniture.
Before fixing with the wood screw
ⓑ
,
double check the indicated point is located
in an accurate position.
11. Mark two points in the paper Jig ⑨ on the
integrated door panel. (See Figure 8)
9
A
1595mm
(Figure 7)
Reference line
of paper jig (for
the right hinge) Reference line
of paper jig (for
the left hinge)
(Figure 8)
⑨
12. After removing the paper jig ⑨ , fix the top
bracket ⑩ of the integrated door panel by
using the wood screw ⓑ (4 places) with the
top two holes lined up to the marked spots
(from the paper jig) on the integrated door
panel. (See Figure 9)
※ ※ Reference
- If you need to re-position top bracket
due to incorrect positioning. Align
top two holes to remarked position
(from jig) but use alternate holes to
fix to assure screws hold firmly.
(Figure 9)
b
b
10
6. Procedure to install
3) Integrated door panel related work