LG Flatron W2253TQ User Manual Download Page 23

Page: 23 / 26

A21

Display image is incorrect

❁

The screen color is

mono or abnormal.

❁

The screen blinks.

• Check if the signal cable is properly connected

and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in

the slot.

•Set the color setting higher than 24 bits (true color)

at Control Panel -Settings .

• Check if the screen is set to interlace mode and if
yes,change it to the recommend resolution.

Troubleshooting

Have you installed the display driver?

❁

Have you installed

the display driver?

❁

Do you see an

"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?

•

Be sure to install the display driver from the display

driver CD (or diskette)that comes with your
display.Or,you can also download the driver from
our web site:http://www.lge.com.

•

Make sure to check if the video card supports

Plug&Play function.

Summary of Contents for Flatron W2253TQ



























Search results

Summary of Contents for Flatron W2253TQ

Reviews:

Related manuals for Flatron W2253TQ

Brands by name

Popular brands

LG Flatron W2253TQ, User Manual

Search results

Summary of Contents for Flatron W2253TQ

Reviews:

Related manuals for Flatron W2253TQ

Brands by name

Popular brands