- 17 -
Copyright
2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4) Set test-pattern on and display inside pattern. Control is
carried out on three color temperature, COOL, MEDIUM,
WARM. (Control is carried out three times.)
5) When the R/G/B GAIN is 80 on OSD, it is the FULL
DYNAMIC Range of the Module. In order to control white
balance without the saturation of FULL DYNAMIC Range
and DATA, one of R Gain / G Gain / B Gain should be kept
on 80, and other two is controlled lowering from 80.
* Color Temperature : Cool, Medium, Warm
1) When R GAIN is set to 80
- Control G GAIN and B GAIN by lowering from 80.
2) When B GAIN is set to 80
- Control R GAIN and G GAIN by lowering from 80.
3) When G GAIN is set to 80
- Control R GAIN and B GAIN by lowering from 80.
One of R Gain / G Gain / B Gain should be kept on 80,
and adjust other two lower than 80.
(When R/G/B GAIN are all 80, it is the FULL DYNAMIC
Range of Module)
8. Set information(Serial No & Model name)
(1) Setting up like bottom figure (After setting white balance,
this is set)
(Press ADJ Key in the Adjust remocon.)
- Select “System Control 2” by using
D
/
E
(CH+/-) key, and
press
A
(ENTER).
Using Adjust remocon, RS-232 Host & Baud Rate &
Download value change (RS-232 Host : PC, Baud
Rate:115200bps, Download:Cortez)
(2) Bar-code scanning
1) Push the menu button in DTV mode.
Select the STATION -> Diagnostics -> To set
2) Check the Serial Number.
System Control 2
System
4-SYS
Spread En
On
RS-232 Host
PC
Baud rate
115200bps
Download
Cortez
AGC-L
0
140
Audio Delay
0
DVI EQ
2
EQ Gain
OFF
10% Dimming
OFF
LD73D
Cortez
2.00
Sti 5100
4.17
UTT
0
------------------------------------------
Tool Option 1
196
Tool Option 2
65
Area Option 3
0
OPTION 1
14
2
1
OPTION 2
OPTION 3
OPTION 4
192
System Control 1
System Control 2
System Control 3
BlkLine Detector
Power-off History
Panel Control
Fan Control
Channel Recover
