background image

17

ENGLISH

Sorting Iaundry

1

Look for a care label on your clothes. 

 

This will tell you about the fabric content of your 
garment and how it should be washed.

 

Symbols on the care labels.

Wash temperature

Normal machine wash

Permanent press

Delicate

Hand wash

Do not wash

2

Sorting laundry.

 

To get the best results, sort clothes into loads 
that can be washed with the same wash cycle. 

 

Different fabrics need to be washed at varying 
temperatures and spin speeds. 

 

Always sort dark colours from pale colours and 
whites. Wash separately as dye and lint transfer 
can occur causing discolouration of white and 
pale garments. If possible, do not wash heavily 
soiled items with lightly soiled ones.

 

– Soil (Heavy, Normal, Light)  

Separate clothes according to amount of soil.

 

– Colour (White, Lights, Darks)  

Separate white fabrics from coloured fabrics.

 

– Lint (Lint producers, Collectors)  

Wash lint producers and lint collectors 
separately.

3

Caring before loading.

 

Combine large and small items in a load. Load 

large items first. 

 

Large items should not be more than half the 
total wash load. Do not wash single items. This 
may cause an unbalanced load. Add one or two 
similar items.

 

Check all pockets to make sure that they are 
empty. Items such as nails, hair clips, matches, 
pens, coins and keys can damage both your 
washing machine and your clothes.

 

Close zippers, hooks and strings to make sure 
that these items don’t snag on other clothes.

 

Pre-treat dirt and stains by brushing a small 
amount of detergent dissolved water onto stains 
to help lift dirt.

 

Check inside the drum and remove any items 
from a previous wash.

Summary of Contents for FH695BDH0N

















































Reviews: