background image

22

programme

description

fabric Type

proper 

Temp.

Maximum 

Load

Speed 14

This cycle provides fast washing 
time for small loads and lightly soiled 
clothes.

Coloured laundry which is lightly 
soiled fast.  
CAUTION : Use less than 20g of 
detergent (for 2.0kg load) otherwise 
detergent may remain on the clothes.

20°C 

(20°C to 

40°C)

2.0 kg

Gentle Care

This cycle is for hand and machine 
washable delicate clothes such as 
washable wool, lingerie, dresses etc. 
(Use detergent for machine washable 
woolens).

wool, hand washable clothes, 
delicate, easily damaged laundry

20°C 

(Cold to 30°C)

1.5 kg

Stain Care

Wash off several kinds of stain 
such as wine, juice, dirt, etc. (Water 
temperature is increased step by step 
for washing various stains.)

cotton blended fabrics, NO delicate 
clothes

40°C 

(30°C to 

60°C)

3.0 kg

download 

Cycle

For downloadable cycles. If you did not download any cycles, the default is Rinse+Spin.

 

Water Temperature: Select the appropriate water temperature for chosen wash cycle. Always follow garment 
manufacturer’s care label or instructions when washing.

 

Set program at "Cotton Large 40°C (Half Load)", "Cotton Large 60°C (Half Load)", "Cotton Large 60°C (Full Load)" 
option for test in conformity with EN60456 and Regulation 1015/2010. 
- Standard 60°C cotton program : Cotton Large 

 +  60°C  (Full Load) 

- Standard 60°C cotton program : Cotton Large 

 +  60°C  (Half Load) 

- Standard 40°C cotton program : Cotton Large 

 +  40°C  (Half Load) 

(They are suitable to clean normally soiled cotton laundry.) 

(They are the most efficient programmes in terms of combined energy and water consumptions for washing that 

type of cotton laundry.) 
* Actual water temperature may differ from the declared cycle temperature.

 

The test results depend on water pressure, water hardness, water inlet temperature, room temperature, type and 

amount of load, degree of soiling utilized detergent, fluctuations in the main electricity supply and chosen additional 

options.

NoTE

 

Neutral detergent is recommended.

MFL69042550_EN_151117.indd   22

2015-11-17   오후 1:38:08

Summary of Contents for FH4U1JBS0

















































Reviews: