background image

30

Caution on freezing during 

Winter

 

When frozen, the product does not operate normally. 
Make sure to install the product where it will not freeze 
during winter.

 

In case the product must be installed outside on a 
porch or in other outdoor conditions, make sure to 
check the following.

How to Keep the product from freezing

 

After washing, remove water remaining inside the 
pump completely with the opening hose plug used for 
removal of residual water. When the water is removed 
completely, close the hose plug used for removal of 
residual water and cover cap.

Cover cap

Drain plug

 

Hang down drain hose to pull out water inside the 
hose completely.

Drain hose

 

When the drain hose is installed in a curved 
shape, the inner hose may freeze.

CAuTIoN

 

After closing the tap, disconnect the cold inlet hose 
from the tap, and remove water while keeping the 
hose facing downwards.

Cold inlet 

hose

Check for freezing

 

If water does not drain when opening the hose plug 
used for removal of residual water, check the drainage 
unit.

Drain plug

Cover cap

 

Turn the power on, select Rinse and Spin, and press 
the 

Start/pause

 button.

Detergent drawer

Drain hose

NoTE

 

Check that water is coming into the detergent 
drawer while rinsing, and water is draining through 
the drain hose while spinning.

 

When ‘

’ is shown in display window while the 

product is in operation, check water supply unit and 
drainage unit (Some models do not have an alarm 
function that indicates freezing).

Summary of Contents for FH2G6QDY










































Reviews: