background image

5

FOR LG TECHNICIAN

2-2. NEURO FUZZY WASHING TIME OPTIMIZATION

To get the best washing performance, optimal time is determined by the water temperature,  
the selected washing temperature, and the size of the load.

water

temperature

washing time

rinsing time

the best
washing
performance

spin rhythm, time

selected
washing

temperature

NEURO-

FUZZY

SENSING

PROCESSING

DETERMINATION

EFFECT

load

size

2-3. WATER LEVEL CONTROL

This model incorporates a pressure sensor which can sense the water level in the tub.

 

z

 The water supply is stopped when the water level reaches the preset level, the washing program then 

 

z

proceeds.
 Spinning does not proceed until the water in the tub drains to a certain level.

 

z

2-4. DOOR CONTROL

The door can be opened by pulling the door handle whenever washer is not in operation.

 

z

When the cycle is completed, the DOOR LOCKED light will turn off.

 

z

If a power failure has occurred while in operation, the door will unlock after 5 minutes.

 

z

Clicking sounds can be heard when the door is locked/unlocked.

 

z

Summary of Contents for FH2D7RD Series












































Reviews: