background image

9

CLOCK SETTING

Example : Set to 9:25 in the morning

1. Press the CLOCK button.

(If the clock is already

set, press and hold the 

CLOCK

button for more

than 1.5 seconds)
- The hours begin to blink.

2. Select a 24 hour cycle or 12 hour cycle by

pressing PRESET DOWN or UP button (or
turning the JOG DIAL).

(24HR)   or    (12HR)

3. Press the CDII/SET/COUNTER RESET button.

4. Set the hour with PRESET DOWN or UP

button (or turn the JOG DIAL).

5. Press the CDII/SET/COUNTER RESET button.

6. Set the minute with PRESET DOWN or UP

button (or turn the JOG DIAL).

7. Press the CDII/SET/COUNTER RESET button.

The clock starts operating.

Information on the time
AM 12:00 = midnight
PM 12:00 = noon

NOTE:
When a power interruption has occurred for more
than 10 seconds.

The clock setting is erased, and Ò-- : --Ó will flash on the
display.

CLOCK

TUNING DOWN

PRESET

DOWN

PRESET

CD 

II

SET/

COUNTER RESET

UP

CLEAR

CD/TAPE

TUNING UP

TUNING DOWN

PRESET

DOWN

PRESET

CD 

II

SET/

COUNTER RESET

UP

CLEAR

CD/TAPE

TUNING UP

TUNING DOWN

PRESET

DOWN

PRESET

CD 

II

SET/

COUNTER RESET

UP

CLEAR

CD/TAPE

TUNING UP

TUNING DOWN

PRESET

DOWN

PRESET

CD 

II

SET/

COUNTER RESET

UP

CLEAR

CD/TAPE

TUNING UP

TUNING DOWN

PRESET

DOWN

PRESET

CD 

II

SET/

COUNTER RESET

UP

CLEAR

CD/TAPE

TUNING UP

TUNING DOWN

PRESET

DOWN

PRESET

CD 

II

SET/

COUNTER RESET

UP

CLEAR

CD/TAPE

TUNING UP

Summary of Contents for FE-515E




















Reviews: