15
RECORDING
Recording from a CD, Radio or
Connected Equipment
Preparation
Wind on the tape to the point recording starts.
Use only normal tapes.
You can record from cassette deck 2 only.
1. To select the function :
Switch the unit on and select CD, TUNER, AUX
etc.
2. To insert the cassette :
Open the cassette deck 2.
Insert a blank cassette into the cassette
compartment.
3. PLAY MODE (OPTIONAL)
Select the play mode with PLAY MODE button,
if you wish to record one cassette side only and
or for both cassette sides.
4. Recording mode :
Press the REC/PAUSE button.
The
REC indicator flashes.
5. To start recording :
Press the REC/PAUSE button or PLAY button
if you want to record the front side or for the
reverse side (OPTIONAL). The recording begins.
NOTE :
If both cassette sides are to be recorded (PLAY
MODE , ) always start with the front side
PLAY
. (Use only auto reverse deck)
6. To interrupt recording :
To interrupt the recording for a short period, press
the REC/PAUSE button again.
To continue with the recording, press the
REC/PAUSE button one more time.
7. To end the recording :
Press the STOP / CLEAR ( / CLEAR ) button.
The unit stops automatically at the end of the
tape.
CD Synchro Recording
The CD synchro recording function dubs a complete
CD and programmed titles automatically into a
cassette.
1. Select the CD function.
2. Open the CD compartment with the CD OPEN /
CLOSE button, insert discs and close the CD
compartment again.
3. To insert cassette :
Open the cassette deck 2.
Insert a blank cassette into the cassette
compartment.
Rewind the cassette to the beginning of the tape.
4. Auto reverse (OPTIONAL)
Select the PLAY MODE, if you only wish to
record the front side and or for both
cassette sides.
NOTE:
If the last track has stopped because the tape is full,
the track will be recorded again completely on the
reverse side of the cassette tape.
5. To start recording :
Press the CD SYNCHRO RECORDING button.
The recording begins and stops automatically at
the end of the CD.
NOTE:
In case of Auto Stop deck (OPTIONAL)
If you want to record in a new tape after one tape
continuously, change the new tape prior to pressing
the PLAY button.
The tape enters into the recording mute mode for 7
seconds then CD player starts playing and recording.
NOTES :
1. If you only want to record certain titles, program
these before the CD synchro recording.
2. If you wish to record from the desired track, select
the desired track with the /
button before commencing CD synchro recording.
3. The function change is not possible during
recording.
Summary of Contents for FE-515E
Page 19: ......
