18
Troubleshooting
Reference
Causa
The power cord is disconnected.
The power of the external source
equipment is switched off.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.
The remote control is not pointed at the
remote sensor of the unit.
The remote control is too far from the unit.
There is an obstacle in the path of the
remote control and the unit.
The batteries in the remote control are
exhausted.
Correction
Plug the power cord into the wall
outlet securely.
Switch on the external source
equipment.
Insert a disc.
Insert a playable disc.
Place the disc with the playback side
down.
Place the disc on the disc tray
correctly inside the guide.
Clean the disc.
Point the remote control at the remote
sensor of the unit.
Operate the remote control
within about 23 ft (7 m).
Remove the obstacle.
Replace the batteries with new ones.
Symptom
No power
No sound
The unit does
not start
playback
The remote
control does not
work properly
Trademarks and Licenses
Summary of Contents for FA162
Page 20: ......
