LG F84J Series, Owner'S Manual

Page: 14 / 145

Using Anti-Slip Sheets (Optional)
If you install the appliance on a slippery surface, it may
move because of excessive vibration. Incorrect leveling
may cause malfunction through noise and vibration. If
this occurs, install the anti-slip sheets under the leveling
feet and adjust the level.
1
Clean the floor to attach the anti-slip sheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains, the
anti-slip sheets may slip.
2
Adjust the level after placing the appliance in the
installation area.
3
Place the adhesive side of the anti-slip sheets on
the floor.
•
It is most effective to install the anti-slip sheets
under the front legs. If it is difficult to place the
pads under the front legs, place them under the
back legs.
This side up
Adhesive side
4
Ensure the appliance is level.
•
Push or rock the top edges of the appliance
gently to make sure that the appliance does not
rock. If the appliance rocks, level the appliance
again.
NOTE
•
You can obtain anti-slip sheets from the LG Service
Centre.
Wooden Floors (Suspended
Floors)
• Wooden floors are particularly susceptible to vibration.
•
To reduce vibration we recommend you place rubber
cups at least 15 mm thick under each foot of the
appliance, secured to at least two floor beams with
screws.
Rubber cup
• If possible install the appliance in one of the corners of
the room, where the floor is more stable.
•
Fit the rubber cups to reduce vibration.
NOTE
• Proper placement and leveling of the washing machine
will ensure long, regular, and reliable operation.
•
The washing machine must be 100% horizontal and
• It must not ‘Seesaw’ across corners under the load.
•
wax and other lubricant coatings.
• Do not let the feet of the washing machine get wet.
Failure to do so may cause vibration or noise.
• You can obtain rubber cups from the LG Service Centre.
EN
13