background image

5

Important safety instructions

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic
precautions, including the following:

WARNING

• Before installation, check exterior

damages. If it has, do not install. 

• Do not install or store the washer

where it will be exposed to the
weather.

• Do not tamper with controls.
• Do not repair or replace any part of

the washer or attempt any servicing
unless specifically recommended in
the user-maintenance instructions or
published user-repair instructions
that you understand and have the
skills to carry out.

• Keep the area underneath and around

your appliances free of combustible
materials such as lint, paper, rags,
chemicals, etc.

• The appliance is not intended for use

by young children or infirm persons
without supervision. Do not allow
children to play on, with, or inside this
or any other appliance.

• Keep small animals away from the

appliance. 

• Do not leave the washer door open.

An open door could entice children to hang
on the door or crawl inside the washer.

• Never reach into washer while it is

moving. Wait until the drum has
completely stopped.

• The laundry process can reduce the flame

retardant of fabrics. 

To avoid such a

result, carefully follow the garment
manufacturer’s wash and care
instructions.

• Do not wash or dry articles that have

been cleaned in, washed in, soaked
in, or spotted with combustible or
explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-
cleaning solvents, kerosene, etc.)
which may ignite or explode.

Oil may

remain in the tub after a whole cycle resulting
in fire during drying. 

So, do not load oiled clothes.

• Do not slam the washer door closed

or try to force the door open when
locked.

This could result in damage to the

washer.

• When the machine runs high

temperature, the front  door may be
very hot. Don’t touch it. 

• To minimize the possibility of electric

shock, unplug this appliance from the
power supply or disconnect the
washer at the household distribution
panel by removing the fuse or
switching off the circuit breaker
before attempting any maintenance or
cleaning.

• When unplugging power cord, do not

pull out by grasping the cord.

Otherwise, the power cord may be damaged. 

• Never attempt to operate this

appliance if it is damaged,
malfunctioning, partially
disassembled, or has missing or
broken parts, including a damaged
cord or plug.

Basic safety precautions

Summary of Contents for F14A8RDS2









































Reviews: