background image

3

추가선택

예약

Inverter Direct Drive system

The advanced Brushless DC motor directly drives the drum without 
belt and pulley.

Low noise speed control system

By sensing the amount of load and balance, it evenly distributes load
to minimize the spinning noise level.

Child Lock

The Child Lock prevents children from pressing any button to change
the settings during operation.

More economical with Intelligent Wash system

Intelligent Wash System detects the size of load and water temperature,
and then determines the optimum water level and washing time to
minimize energy and water consumption.

B

uilt-in heater

Internal heater automatically heats the water to the best temperature
on selected cycles.

Protection against creases

With the alternating rotation of the drum, creasing is minimized.

6 Motion

Washer is able to perform various drum actions or a combination of
different actions depending on the wash program selected. 
Combined with a controlled spin speed and the ability of the drum to
rotate both left and right, the wash performance of the machine is greatly
improved, giving you perfect results every time.

Product Features

Auto Restart

Auto Restart allows the program to restart all by itself in case of power
failure. It does from the stage where it stopped.

Summary of Contents for F14A8RDS2









































Reviews: