15
ow to use washer
H
1. POWER ON/OFF BUTTON
2. CYCLE SELECTOR KNOB
3. START/PAUSE BUTTON
5. CYCLE SETTING BUTTONS
6. DELAY WASH BUTTON
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle setting
buttons anytime before starting the cycle.
Press to turn the washer ON. Press again to turn
the washer OFF.
NOTE
: Pressing the ON/OFF button during a
cycle will cancel that cycle and any load settings
will be lost.
Press this button to START the selected cycle.
If the washer is running, use this button to
PAUSE the cycle without losing the current
settings.
NOTE
: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
4. ADD LOAD
Use it to open the door while processing.
It is conveniently used to add the laundry or to
remove the foreign material while processing.
Press this button to delay the start of the wash
cycle. Each press of the button increases the
delay time by 3 hours, up to 19 hours.
7. LED DISPLAY
The display shows the settings, estimated time
remaining, options, and status messages for
your WASHER. The display will remain on
through the cycle.
8. OPTION BUTTONS
The option buttons allow you to select additional
cycle options and will light when selected.
For detailed information about the individual
options, please see the following pages.
Use these buttons to select the desired cycle
options for the selected cycle. Press the button
for that setting until the indicator light for the
desired value is lit.
