LG F1222GD1 Owner'S Manual Download Page 21

Page: 21 / 32

• If the machine encounters a fault during

operation, the associated fault will be
displayed.

“ ” : Water pressure sensing error

“ ” : Problem of overfilling water

“ ” : Door is not closed

“ ” : Over load in motor

“ ” : Water inlet trouble

“ ” : Drainage trouble

“ ” : Unbalanced load

“ ” : Water temperature trouble

“ ” : The washer experienced a power

failure.

If these error letters are displayed, please refer
to the troubleshooting page26 and follow the
guide.

Display

• When child lock is selected, the

“ ” is displayed.

• When time delay is selected, it shows the

remaining time to finish the selected
program.

• When washing cycle is completed, “ ”

is displayed on the “

Multi display

”.

• During washing cycle, the remaining washing

time is displayed.

• Recommended program by manufacturer.

- Cotton :

around 1 hour and 55 minutes

- Cotton Quick

around 1 hour and 29 minutes

- Synthetic :

around 1 hour and 15 minutes

- Quick 30 :

around 30 minutes

- Hand Wash/Wool :

around 51 minutes

- Delicate :

around 57 minutes

- Duvet :

around 1 hour and 9 minutes

- Bulky :

around 59 minutes

- Baby Care :

around 1 hour and 54 minutes

- Bio Care :

around 2 hours and 17 minutes

- Boiling Care

around 2 hours and 17 minutes

- Rinse+ Spin :

around 23 minutes

- Spin :

around 18 minutes

• The washing time may vary by the amount of

laundry, water pressure, water temperature
and other washing conditions.

• If an unbalanced load is detected or if the

suds removing program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)

1. Special function display

3. Completion of washing

4. Time left

2. Self diagnosis display

ow to use washer

Summary of Contents for F1222GD1

































Search results

Summary of Contents for F1222GD1

Reviews:

Related manuals for F1222GD1

Brands by name

Popular brands

LG F1222GD1, Owner'S Manual

Search results

Summary of Contents for F1222GD1

Reviews:

Related manuals for F1222GD1

Brands by name

Popular brands