manualshive.com logo in svg

LG ESS Home 8, Installation Manual, Page: 101 / 150

Share
Download
LG ESS Home 8 Installation Manual Download Page 101

Settings 

101

Due to our policy of continuous product innovation, some specifications may change without notice. 

 

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

AWHP

If the port setting is set to [AWHP], set the [AWHP Type] and [Energy Level Setting] options. The 
AWHP settings run the heatpump with the energy generated by the surplus power of the system.

If the AWHP function is activated, the AWHP status and AWHP energy flow can be checked on the 

HOME screen.

External Shutdown Switch

To use an external shutdown switch, set the [External Shutdown Switch] option to [Installed].

Operating Mode

You can select a operating mode.

PV Self-consumption Mode

This mode operates by minimizing the power used in the system. Power generated from solar power 
is supplied to the load and the battery is charged with the remaining surplus power. When the battery 
is fully charged, the surplus power is supplied to the grid. If the load used power is greater than the 
solar power, the power stored in the battery is used.

ToU Mode

In this mode, charging/discharging is performed for each section by directly inputting the rate applied 
for each time period.
Available tables are [Summer/Weekday], [Summer/Weekend], [Winter/Weekday], and [Winter/
Weekend]. You can make up to 24 sections with the designated load type. The load type can be set to 
[Off-Peak], [Shoulder], [Peak], or [Super-Peak].

Backup Only Mode

This mode fully charges the battery in case of a power outage. If this mode is selected, the battery is 
fully charged and it is not discharged until the mode is changed.

Summary of Contents for ESS Home 8























































































































































Reviews:

No comments