background image

ENGLISH

2

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. 
REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of 

uninsulated “dangerous voltage” within the product’s 

enclosure that may be of sufficient magnitude to constitute a risk 
of electric shock to persons.

This symbol is intended to alert the user to the presence of 

important operating and maintenance (servicing) 

instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, 
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR 
OTHER ITMES WITH OPEN FLAMES AWAY FROM THIS 
PRODUCT AT ALL TIMES.

 

Do not place the TV and/or remote control in the following 
environments:

 

-

A location exposed to direct sunlight

 

-

An area with high humidity such as a bathroom

 

-

Near any heat source such as stoves and other devices that produce 
heat

 

-

Near kitchen counters or humidifiers where they can easily be 
exposed to steam or oil

 

-

An area exposed to rain or wind

 

-

Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or 
product deformation.

 

Do not place the product where it might be exposed to dust. This may 
cause a fire hazard.

 

Mains Plug is the TV connecting/disconnecting device to AC mains 
electric supply. This plug must remain readily attached and operable 
when TV is in use.

 

Do not touch the power plug with wet hands. Additionally, if the cord 
pin is wet or covered with dust, dry the power plug completely or 
wipe dust off. You may be electrocuted due to excess moisture.

 

Make sure to connect Mains cable to compliant AC mains socket with 
Grounded earth pin. (Except for devices which are not grounded on 
earth.) Otherwise possibility you may be electrocuted or injured.

 

Insert power cable plug completely into wall socket otherwise if not 
secured completely into socket, fire ignition may break out.

 

Ensure the power cord does not come into contact with hot objects 
such as a heater. This may cause a fire or an electric shock hazard.

 

Do not place a heavy object, or the product itself, on power cables.  
Otherwise, this may result in fire or electric shock.

 

Bend antenna cable between inside and outside building to prevent 
rain from flowing in. This may cause water damaged inside the 
Product and could give an electric shock.

 

When mounting TV onto wall make sure to neatly install and isolate 
cabling from rear of TV as to not create possibility of electric shock /
fire hazard.

 

Do not plug too many electrical devices into a single multiple 
electrical outlet. Otherwise, this may result in fire due to over-
heating.

 

Do not drop the product or let it fall over when connecting external 
devices. Otherwise, this may result in injury or damage to the 
product.

 

Keep the anti-moisture packing material or vinyl packing out of the 
reach of children. Anti-moisture material is harmful if swallowed. If 
swallowed by mistake, force the patient to vomit and visit the nearest 
hospital. Additionally, vinyl packing can cause suffocation. Keep it out 
of the reach of children.

 

Do not let your children climb or cling onto the TV.  
Otherwise, the TV may fall over, which may cause serious injury.

 

Dispose of used batteries carefully to ensure that a small child 
does not consume them. Please seek Doctor- Medical Attention 
immediately if child consumes batteries.

 

Do not insert any metal objects/conductors (like a metal chopstick/
cutlery/screwdriver) into the end of power cable while the power 
plug is plugged into wall socket. Additionally, do not touch the 
power plug right after unplugging from the wall socket. You may be 
electrocuted.

 

Do not put or store inflammable substances near the product. There is 
a danger of combustion/explosion or fire due to careless handling of 
the inflammable substances.

Summary of Contents for EG9A7 Series





































Reviews: