Control Panel Functions
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the
AUTO
button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E2050S/E2050T : 1600 x 900
AUTO
Button
INPUT
Button
(SOURCE Hot key)
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
(Only
E2050T
/
E2250T
/
E2350
T )
EXIT
Button
Use these buttons to
exit
the On
Screen Display.
Power Button &
Use this button to turn the display on or off.
Power Indicator
The power indicator stays
white
if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking
white
12
This is lens for light sensor sletect outside luminance,
when setting AUTO BRIGHT ON.
Light sensor
Use this button to enter a selection in the On Screen
Display.
E2250
S
/E
22
50T : 1920 x 1080
E2
3
50
S
/E2350T : 1920 x 1080
Summary of Contents for E2050S
Page 36: ...Digitally yours ...
