15
Installation and Setup
Speaker System Connection
Connect the speakers using the supplied speaker cords.
To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).
Notes:
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the
speakers.
About Ferrite Core
Be sure to attach the ferrite core to the speaker
cables (for connecting to this unit).
This ferrite core can reduce noises.
How to attach the ferrite core
1
Open
the ferrite core
.
2
Wind the cable once on the ferrite core.
3
Close the ferrite core unit it clicks.
Note:
Attach the ferrite core near the unit (Refer to the fig.3
and comment.).
+
-
FRONT REAR SUB REAR FRONT
R R
WOOFER CENTER
L L
SPEAKERS
Keep t
he length here
as
short as
possible.