7
Hooking up the unit
Audio and V
ideo Connection
Connect the
A
V
OUT
jack on the unit to the corresponding input jacks on your
TV using the supplied
A
V
cable as shown below
.
Revolving the LCD panel
Y
o
u can revolve the LCD panel of the unit clockwise a maximum of 180
degrees for use.
Y
ou can also operate the unit after revolving the LCD panel
180 degrees and folding it back down.
T
o
revolve the LCD panel, place the unit on a stable and even surface such
as on a table. Push the LCD panel up and then lift it into a vertical position.
Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the
LCD panel after revolving it.
T
o
revolve the LCD panel to its original position, open the LCD panel to a verti-
cal position. Revolve the LCD panel counter clockwise slowly 180 degrees.
•
When finished using the unit, return the LCD panel to its original position.
•
Do not leave the LCD panel in the face-up position, or sudden shocks may
damage it.
Selecting the operation mode
Y
ou need to select a operation mode before using this
unit. Press
MODE
on the unit and the operation mode
selection menu appears. Use
b / B
to select a mode
then press
ENTER
.
•
Select [DISC] to playback the inserted disc.
•
Select [USB] to playback the file(s) in the connected USB Flash Drive.
Right side of the unit
Plug into the
“A
V OUT” jack.
TV
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
