background image

Safety Precautions   

Room Air Conditioner

Do not direct airflow at room
occupants.

• This could damage your health.

Do not use the product for
special purposes, such as
preserving foods, works of art,
etc. It is a consumer air
conditioner, not a precision
refrigeration system.

• There is risk of damage or loss of

property.

Do not block the inlet or
outlet of air flow.

• It may cause product failure.

Operation

Do not install the product
where the noise or hot air
from the outdoor unit could
offend neighbors.

• It may cause a problem for your

neighbors.

Use two or more people to lift
and transport the air
conditioner.

• Avoid personal injury.

Do not install the product
where it will be exposed to
sea wind (salt spray) directly.

• It may cause corrosion in the

product. Corrosion, particularly on
the condenser and evaporator fins,
could cause product malfunction
or inefficient operation.

Always check for
gas(refrigerant) leakage after
installation or repair of
product.

• Low refrigerant levels may cause

product failure.

Install the drain hose to
ensure that water is drained
away properly.

• A bad connection may cause

water leakage.

Keep level even when
installing the product.

• To avoid vibration or water

leakage.

90

°

Installation

Summary of Contents for DMC24DB-1


























Reviews: