background image

Additional features

Owner's Manual  19

Vertical Airflow Direction Control

The up/down airflow (Vertical Airflow) can be adjusted
by using the remote control.

Press the Start/Stop button to start the unit.

Open the door on the remote control. 
Press Chaos Swing button and the louvers will swing up
and down. Press the Chaos Swing button again to set
the vertical louver at the desired airflow direction.

If you press the CHAOS swing button, the horizontal airflow
direction is changed automatically based on the CHAOS
algorithm to distribute the air in the room evenly and at the
same time to make the human body feel most comfortable,
as if enjoying a natural breeze.

Always use the remote control to adjust the up/down airflow
direction. Manually moving the vertical airflow direction
louver by hand could damage the air conditioner.

When the unit is shut off, the up/down airflow direction louver
will close the air outlet vent of the system.

NOTICE

Air Circulation Mode

Circulates the room air without cooling or heating.

1. Press the Start/Stop button. the unit will respond with a beep.

2. Open the door on the remote control. Press the Air Circulation button. Close the door on the remote control. Now

each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back
to low again.

CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically
changed from high to low or vice versa, depending on the ambient temperature.

NOTICE

Fan speed is on low.

Fan speed is on medium.

Fan speed is on high.

CHAOS Air

Summary of Contents for DMC24DB-1


























Reviews: