ENGLISH
23
USING THE MONITOR SET
y
If you want to use HDMI-PC mode, you must
set the input label to PC mode.
y
If you do not use an optional external
speaker, connect the PC to the TV with the
optional audio cable.
y
If you turn the TV on when the set becomes
cold, the screen may flicker. This is normal.
y
Use a shielded signal interface cable, such as
D-sub 15 pin signal cable and DVI to HDMI
cable, with a ferrite core to maintain standard
compliance for the product.
y
Some red, green, or blue spots may appear
on the screen. This is normal.
NOTE
DVI to HDMI connection
Transmits the digital video signal from your PC to
the TV. Connect the PC and the TV with the DVI to
HDMI cable as shown the following illustrations.
To transmit an audio signal, connect an optional
audio cable.
RGB connection
Transmits the analog video signal from your PC to
the TV. Connect the PC and the TV with the D-sub
15 pin cable as shown the following illustrations.
To transmit an audio signal, connect an optional
audio cable.
PC
RGB OUT (PC)
AUDIO OUT
1
2
AV
IN
(MONO)
AUDI0
PC
AUDIO OUT
DVI OUT
1
2
(MONO)
AUDI0
y
Connect the signal input
cable and tighten it
by turning the screws
clockwise.
y
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
y
Avoid displaying a fixed image on the screen
for a long period of time to prevent image
burn. Use a screensaver if possible.
CAUTION
