LG DLEX3370 series, Service Manual

Page: 12 / 64

3-2. Connect Gas Supply Pipe
Y
Z
\
X
[
1. Make certain your dryer is equipped for use with the
type of gas in your laundry room. Dryer is equipped
at the factory for Natural Gas with a
3
/
8
” NP T gas
connection.
2. Remove the shipping cap from the gas connection
at the rear of the dryer. Make sure you do not
damage the pipe thread when removing the cap.
3. Connect to gas supply pipe using a new flexible
stainless steel connector.
4. Tighten all connections securely. Turn on gas and
check all pipe connections (internal and external) for
gas leaks with a non-corrosive leak detection fluid.
5. For LP (Liquefied Petroleum) gas connection, refer
to section on Gas Requirements.
For further assistance, refer to section on Gas Requirements.
XG uŒžGz›ˆ•“ŒššGz›ŒŒ“Gm“ŒŸ‰“ŒGj–••ŒŠ›–™GTG|šŒ
–•“ GGˆ““–žŒ‹G‰ G“–Šˆ“GŠ–‹ŒšGO|šŒGkŒšŽ•
hUnUhUGjŒ™›Œ‹Gj–••ŒŠ›–™P
YG
X
V
_
ˉGuw{Gw—ŒGw“œŽG
O–™GŠŒŠ’•ŽG•“Œ›GŽˆšG—™Œššœ™ŒP
ZG l˜œ—”Œ•›Gzœ›TvG}ˆ“ŒTp•š›ˆ““Œ‹Gž›•G]˅
OXU_G”PG–G‹™ Œ™
[ i“ˆŠ’Gp™–•Gw—Œ
z–™›Œ™G›ˆ•GYW˅GO]UXG”PGTG|šŒG Z V
_
ˉG——Œ
s–•ŽŒ™G›ˆ•GYW˅GO]UXG”PGTG|šŒG
X
V
Y
ˉG——ŒG
\
Z
V
_
ˉGuw{GnˆšGj–••ŒŠ›–•
12