PROGRAM CYCLE
4
7
TIME DELAY
You can use the TIME DELAY function to delay the
finishing time of drying cycle.
Maximum TIME DELAY is 19 hours.
Minimum TIME DELAY is 3 hours.
1. Turn the dryer on
2. Select cycle
3. Set time delay hour
4. Press START/PAUSE button
CUSTOM PROGRAM
If you have a special combination of settings
that you use frequently, you can save these
settings as a CUSTOM PROGRAM.
* To Save a Custom Program:
1. Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
2. Use the cycle setting buttons to adjust the
settings for that cycle.
3. Press the cycle option button(s) for the option
you would like to add. A confirmation message
will be shown in the display.
4. Press and hold the CUSTOM PGM button for
3 seconds.
To Recall a Custom Program:
1. Turn on the dryer.
2. Press the CUSTOM PGM button.
3. Press the START/PAUSE button to start the cycle.
WRINKLE CARE
WRINKLE CARE is functioning to prevent creases
and wrinkles that are formed when the laundry is not
unloaded promptly at the end of drying cycle. In this
function, the dryer repeatedly runs and pauses to the
cycle end.
If the door is open during WRINKLE CARE process,
this function is cancelled. But in case of door open
during normal operation without selecting WRINKLE
CARE, this function will be remembered and
processed.
Before the WRINKLE CARE part of the cycle is
reached, it will not be affected.
Note
You may only save one custom program at a
time. Pressing and holding the CUSTOM PGM
button will overwrite any previously saved
custom program.
