LG DH7520T, Owner'S Manual

Page: 34 / 48

Operating 34
Oper
ating
4
Sleep Timer Setting
Press
SLEEP
one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
To check the remaining time, press
SLEEP .
To cancel the sleep function, press
SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP
once again while “SLEEP 10” is displayed.
You can check the remaining time before the
unit turns off.
Press
SLEEP
The remaining time appears in the
display window.
,
Note
Dimmer
Press
SLEEP
once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until dim off.
Turn off the sound temporarily
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, appears the “MUTE” in the
display window.
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
System Select - Optional
You must select the appropriate system mode for
your TV system. Press and hold
M PAUSE/STEP
for more than five seconds to be able to select a
system in the [Home Menu].
If the USB device is connected or a disc is
inserted, this function is not operated.
,
Note
Adjust the speaker level
settings
You can adjust the sound level of each speaker.
1. Press
SPEAKER LEVEL
repeatedly to select a
desired speaker to set.
2. Press
VOL -/+
to adjust the sound level of the
selected speaker while the level setting memu
is displayed on the display window.
3. Repeat and adjust the sound level of the other
speakers.
DH7520T-AC.DIRNDLK_onego.indd 34 2012-01-26 �� 8:06:08
VOCAL FADER
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.) Press the
VOCAL FADER , and
“FADE ON” will appear in display window.
To cancel it, press
VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music
files.
y
This function is available to use only when a
microphone is connected.
y It is not available on the MONO source.
,
Note