Safety and Recommendation
MAINTENANCE
Switch off or unplug the appliance from the mains supply before carrying out any
maintenance work.
Repairs should only be carried out by qualified specialists.
If the supply cord is damaged, it must be replaced by the manufacturer, Its service
agent or similarly qualified persons in order to avoid a hazard.
Light bulbs must always be fitted when the hood is in use.
Defective bulbs should be replaced immediately to prevent the remaining bulbs from
overloading.
There is a fire risk if cleaning is not carried out in accordance with the instructions.
Clean and/or replace the Filters after the specified time period.
Clean the hood using a damp cloth and a neutral liquid detergent.
When cleaning,
- Do not use abrasive cleaning agents or sponges that could cause scratches.
- Do not use alcohol on plastic parts, otherwise the surface may become matt in
appearance.
- Clean the operating buttons with a mild soapy solution and a soft, damp cloth only.
and do not use stainless-steel cleaner to clean the operating buttons.
When cleaning the stainless steel body,
- Use a mild non-abrasive stainless-steel cleaner.
- Do not use any of the following to clean stainless steel body :
abrasive sponges, cleaning agents containing sand, soda, acid or chloride.
- Clean the surface in the same direction as it has been ground and polished.
Old appliances are not worthless rubbish. If they are disposed of in an environment-
friendly manner valuable raw materials can be recovered for use again. Before you
dispose of an old appliance make sure that it has been rendered inoperative.
4
GB
Summary of Contents for DC9201SAU
Page 12: ......
