LG D1453AB Owner'S Manual Download

Page: 31 / 36

Code

Description

The display shows

code

This indicates there was a power failure. This function protects

the dishwasher in the event that the power goes out or the power

to the unit is disrupted. When power is returned, and a button is

pushed, this will display for 10 seconds and then go away.

The display shows

code

means Cool-dry. This is an additional drying cycle to assist

drying performance. This cycle runs for a further 60 minutes after

the course has finished. It can be interrupted at any time by

opening the door.

The display shows

code

means Child-Lock. This function is used to lock or unlock

the control buttons to prevent all the settings from being changed

by a child. It can only be activated during the wash cycle.

The display shows

code

When the unit is displaying

, the sensor is measuring the

water clarity. After 5 minutes of sensing (except draining and

filling), the unit's display will then show the processing time.

The display shows

numbers between 1 ~ 19

Odor

Buzzing sound.

(High Temperature Alarm)

This is not an error code, but indicates the setting of the delay

start. To cancel the function, turn the power off. To change the

course and option, open the door and select another course and

option. Countdown will then continue after door is closed again.

If the dishwasher is not used daily, we recommend to run a

Quick cycle once or twice a day until you have a full load.

In case odor still persists, run a vinegar rinse through a Auto

cycle by putting 2cup(500ml) of white vinegar in an upright

measuring cup in the lower rack, without detergent.

We recommend to maintain according to the USER

MAINTENANCE INSTRUCTIONS.

This is not an error. When you open the door right after heating

wash, rinse or dry, buzzing sound would keep on ringing for

safety if the inside is heated.

•

These are not error codes indicating a malfunction.

TROUBLE SHOOTING GUIDE

Before calling for service

Summary of Contents for D1453AB





































Search results

Summary of Contents for D1453AB

Reviews:

Related manuals for D1453AB

Brands by name

Popular brands

LG D1453AB, Owner'S Manual

Search results

Summary of Contents for D1453AB

Reviews:

Related manuals for D1453AB

Brands by name

Popular brands