- 26 -
10. Disconnect the connecting
points between tub and base
Disconnect noise filter.
(Not on all models)
Disconnect of power cord assembly.
Disconnect wire from the Aquastop.
Now, you can remove the base from the
tub perfectly.
11. C-Base Assembly
You can repair the parts in the C-Base like
heater, washing motor, drain motor etc. you
may refer to 7-1. 8. 1)~10)
Don’t disassemble sump by 7-2.
If you want to disassemble the sump, follow
7-1.
9. Remove the side screws
Remove side 4 screws.
Remove rear 4 screws.
Remove 3 Earth screws of right side.
Lift base upward slightly
(You can’t lift up base perfectly because
of some parts connecting to base.)
