Installation
19
Install
ation
2
Wall Mounting
This product must be installed on the wall considering appropriate environments described in
‘Choice of location’ on page 16. Follow the mounting instruction described below exactly and
securely.
A
538mm
538mm
Place the wall bracket on a wall where
meets every installation conditions and
clearance.
And indicate the positions to drill using
a pencil or the like. And drill holes on the
indicated positions.
WARNING
It is important to ensure the drilling
locations are not located on any electrical
wiring within the wall.
NOTE
When attaching the wall bracket to a wall, adjust the horizontal level using inclinometer.
B
Fix the wall bracket with screws and
anchors.
And insert anchors into the holes at the
lower part.
NOTE
y
Before fixing the bracket screws, check the horizontal level once again using inclinometer.
y
Depending on the surface, different screws and anchors may be required for installing
the wall bracket. Therefore, these screws and anchors are not content of the product. The
system installer is responsible for selecting the proper screws and anchors.
y
It is recommended to use stainless steel screws with M6 - M8.
