manualshive.com logo in svg

LG CR3465BB, Owner'S Manual

Share
Download
LG CR3465BB Owner'S Manual Download Page 50

50

CLEANING THE DUST BIN

•  Operating the unit without filters fitted to the dust bin can cause a motor malfunction 

not covered by the warranty.

•  After cleaning the dust bin, make sure to assemble the filter and fit it to the dust bin. 

If the filters are not installed or the filter cover not assembled before cleaning is started, 

an error message will sound.

•  Always ensure that the dust bin lid is refitted correctly after 

cleaning the dust bin so that it closes easily and accurately.

Tip

1.  Open the dust bin compartment cover by 

pressing the PUSH button on the Robot 

Cleaner.

2.  Grab the handle of the dust bin and pull it 

upward.

3.  Pull the hook on the left of the filter cover on 

the rear of the dust bin to separate the filter 

and the sponge.

    

※

  Note that separating the filter may result in 

dust dropping.

    

※

  Refer to p.51 when cleaning the dust bin 

filter.

4.  Lift the dust bin lid upward while pressing the 

separation button on the dust bin.

5.  Empty the dust bin and clean it with a cleaning 

brush or under running water.

6.  After cleaning with water, completely dry the 

dust bin in a well-ventilated area out of direct 

sunlight.

7.  Reassemble the dust bin, putting the sponge 

and particulate filter back in and closing the lid.

    

※

  Refer to p.51 for detailed assembly guides. 

8.  Put the dust bin into the Robot Cleaner and 

close the dust bin compartment cover.

If the dust bin is full, suction power may be reduced. Clean the dust bin before or after each cleaning 

session. Clean the dust bin using the following sequence:

Summary of Contents for CR3465BB





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands