Operating
35
Oper
ating
3
KEY CHANGER
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
y
To sharp the key one by one, press the KEY
CHANGER(
) repeatedly during playback.
y
To flatten the key one by one, press the KEY
CHANGER(
) repeatedly during playback.
y
This function is available CD, USB or BT
(Bluetooth) Function.
y
If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
y
To initialize it, change the Function, disconnect
the microphone or change the music.
y
This function may not be initialized depending
on the status of connected devices.
,
Note
Lighting Effects
This function offers a party atmosphere by operating
the lighting ball on the unit and the lighting on the
speakers.
Press
LIGHTING
on the unit.
OFF PEACEFUL ROMANTIC COOL
UPBEAT
FIERY
EXCITED
DYNAMIC
HEALING
SUNNY PARTY
OFF ...
y
Lighting function is available in all functions.
y
Lighting mode retains its previous mode
when you first press
LIGHTING
, press again
to change modes.
,
Note
PARTY THRUSTER
Slide the lever to create a party atmosphere.
PARTY THRUST OFF PARTY THRUST 1
PARTY THRUST 2 PARTY THRUST CLIMAX
The lighting ball on the unit, the lighting on the
speakers, the LED lighting and the sound effect
will react according to moving the lever of
PARTY
THRUSTER
.
Setting the Clock
1. Turn the unit on.
2. Press and hold
CLOCK
.
3. Select time mode by pressing
C/V
on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press
SET
to confirm your selection.
5. Select the hours by pressing
C/V
on the
remote control.
6. Press
SET
.
7. Select the minutes by pressing
C/V
on
the remote control.
8. Press
SET
.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 26)
Your unit’s clock will be automatically synchronized
with your device by activating
Bluetooth
connection
through “Music Flow Bluetooth” app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold
ALARM
.
3. Press
C/V
on the remote control to
change the hours and minutes and press
SET
to
save.
4. Press
C/V
on the remote control to select
function and press
SET
to save.
- Press
C/V
on the remote control to
select a memory No. when you select Tuner and
then, press
SET
.
If there is no memory No., this step is skipped.
5. Press
C/V
on the remote control to
change the volume and press
SET
to save. The
clock icon “
(
” shows that the alarm is set.
Summary of Contents for CM9960
Page 45: ......
