LG CM9960, Owner'S Manual

Page: 23 / 45

Operating 23
Oper
ating
3
MIX
You can mix audio sounds.
1. Press MIX . ‘MIXER ON’ is displayed.
Select a desired Function for A SIDE and play it.
Mix is available in all functions except USB 2.
2. During playback, insert a USB device in USB port
b
and play it. B SIDE is fixed as USB 2 function.
3. Move the Mix fader to adjust the sound volume
of mixed sound. Move it to the left to lower the
volume of
B SIDE and move it to the right to
lower the volume of A SIDE .
y
In MIXER ON mode,
- You can adjust the Tempo for USB function
1 or 2.
- If you press Y
/
U , I or T on the
unit, it works only for each side.
- If you press C/V , d / M or Z on the
remote control, it works for both A SIDE
and B SIDE .
- For operating, it is recommended to use
Y
/
U , I or T on the unit instead
of remote control’s.
- Numerical buttons do not work.
- You can use H/P MODE. (Refer to page
34)
y
If you turn off the unit in the middle of mixing
process, MIX mode turns to OFF.
,
Note
AUTO SYNC
When using Mixing, you can synchronize the tempo
of audio files being played in USB 1 and USB 2 by
pressing
AUTO SYNC .
To stop it, press AUTO SYNC twice.
y
The tempo of music being played in USB1 is
synchronized to that in USB2.
y
A TEMPO doesn’t work when AUTO SYNC is
on.
y
If USB2 fully stops or function is changed,
AUTO SYNC function is cancelled.
y
In case of below, AUTO SYNC error may occur
depending on the sound source.
- The silent section in the beginning of the
track.
- Intro or bridge section in which few musical
instruments appear.
- In cases where playback speed or tempo of
the song changes.
- In case that the data for BPM is provided
in real time, not the beginning of the song.
y
If the song is being played too fast or slow,
press and hold
AUTO SYNC . ‘AUTO SYNC/
RE-ANALYZING’ is displayed.
y
AUTO SYNC is available only when USB 1 is
selected for
A SIDE and USB 2 is selected
for B SIDE in MIXER ON mode and both are
being played.
,
Note