Operating
24
Oper
ating
3
Radio Operations
Be sure that FM aerial is connected. (Refer to the
page 16)
Listening to the radio
1. Press
TUNER
on the unit or
FUNCTION
on the
remote control until FM appears in the display
window.
The last received station is tuned in.
2. Auto tuning :
Press and hold
TUNING-/+
on the remote
control or
Y/U
on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
Press
TUNING-/+
on the remote control or
Y/U
on the unit repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing
VOL +/-
on the remote
control repeatedly.
Improving poor FM reception
Press
T
on the unit or
d
/
M
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press
TUNER
on the unit or
FUNCTION
on the
remote control until FM appears in the display
window.
2. Press
TUNING-/+
on the remote control or
Y
/
U
on the unit to select a desired
frequency.
3. Press
TUNER MEMORY
. A preset number will
blink in the display window.
4. Press
PRESET.FOLDER
W
/
S
to select the
preset number you want.
5. Press
TUNER MEMORY
. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER
W
/
S
or
0
to
9
numerical
buttons.
Deleting all the saved stations
1. Press and hold
TUNER MEMORY
for two
seconds.
“ERASE ALL” will flash up on the unit display.
2. Press
TUNER MEMORY
to erase all the saved
radio stations.
Summary of Contents for CM9730
Page 34: ......
