LG CM4340, Owner'S Manual

Page: 25 / 32

Operating 25
Oper
ating
3
Listening to music stored on
the Bluetooth devices
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
FUNCTION
.
“BT READY” appears on the display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as “LG MINI (XX:XX)”.
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such as
9C:02:98:4A:
F7:08
, you will see “LG MINI (
F7:08
)”
on your Bluetooth device.
,
Note
3. Enter the PIN code.
PIN code : 0000
Depending on the Bluetooth device type,
some device have a different pairing way.
,
Note
4. When this unit successfully paired with your
Bluetooth device, “BT PAIR” appears in the
display window.
5. Listening to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
According to your mobile phone’s volume level,
the volume level of Bluetooth will be adjusted.
y
Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
y
When you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
,
Note
y
When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-
There is a obstacle between the unit and
the bluetooth device.
- There is a device using same frequency
with
Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y
You should connect your Bluetooth device
to this unit again when you restart it.
y
The sound may be interrupted when
the connection interfered by the other
electronic wave.
y
You cannot control the Bluetooth device
with this unit.
y
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
You can enjoy wireless system using phone,
MP3, Notebook, etc..
y
When not connected the Bluetooth, “BT” and
“BT READY” appears on the display window.
y
When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
y
The more distant between the unit and
the bluetooth device, the lower the sound
quality becomes.
y
When Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
y
After your device is connected to the unit
via Bluetooth, the function switches to BT
automatically. But while recording, it doesn’t
switch to BT.
,
Note
CM4540-DB_DDEULLK_ENG_6527.indd 25 2014-02-10 9:41:59