Operating
20
Oper
ating
2
Radio Operations
Listening to the radio
1. Press
FUNCTION
on the remote control or
F
on
the unit. until Tuner in the display window.
The last received station is tuned in.
2. Auto tuning : Press and hold
TUN.(-/+)
on the
remote control or
Y/U
on the unit for
about 2 seconds until the existing frequency
starts changing, then hands off. Scanning stops
when the unit tunes in a station.
Manual tuning : Press
TUN.(-/+)
on the remote
control or
Y/U
on the unit repeatedly.
3. Adjust the volume by pressing
p
/
o
.
Presetting the Radio Stations
You can preset 50 stations for FM . Before tuning,
make sure to turn down the volume.
1. Press
FUNCTION
on the remote control or
F
on
the unit. until Tuner in the display window.
The last received station is tuned in.
2. Select the desired frequency by pressing
TUN.(-/+)
on the remote control or
Y/U
on the unit.
3. Press
PROGRAM/MEMORY
. A preset number
will blink in the display window.
4. Press
PRESET
.
FOLDER
W
/
S
to select the
preset number you want.
5. Press
PROGRAM/MEMORY
. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET
.
FOLDER
W
/
S
.
Deleting all the saved stations
1. Press and hold
PROGRAM/MEMORY
for two
seconds. “CLEAR” will blink on the display
window.
2. Press
PROGRAM/MEMORY
to erase all saved
radio stations.
Improving poor FM reception
Press
d
/
M
on the remote control. This will change
the tuner from stereo to mono. Then the reception
will be better than before.
Be sure to fully extend the FM wire antenna.
,
Note
CM2540-FG.AAUSLLK_3469-ENG.indd 20
2014-05-15 �� 10:19:07
