13
ENGLISH
Setting Universal Control
You can control devices such as Set-Top Box, Blu-ray Player, or Home Theater
using by Magic Remote or Slim Remote.
•
This feature is available on certain models only.
1
Check that the device you want to set is connected to your projector.
2
Press the
button on the remote control and select
at the top right.
(Press the
button on the remote control.)
3
Select
All Inputs
and go to
INPUTS
.
4
Select the input mode that the device is connected to in
INPUTS
.
5
If you press
Set Up Universal Control
, you can set up the Universal Control.
Follow the instructions on the screen to finish the setup.
•
If you want to change or cancel Universal Control Settings, go to
All
Inputs
and select
Edit Universal Control
.
•
You can also set the Universal Control in
Device Connector
.
•
You can use this only with the Magic Remote or Slim Remote. (The provided
remote control differ depending upon model.)
•
You can purchase the Magic Remote separately if it is not provided.
•
This feature is available in certain countries only.
•
When changing the settings, check that the device to be changed is turned on.
•
You can set one device per type.
•
If you connect to a network before setting the Universal Control, the latest
update for the supported manufacturer list becomes available.
•
Some buttons may not work depending upon the model of the external device.
•
Place the device near the projector for seamless operation.
•
If there is an obstacle in front of the device, it may not be able to receive the
signal properly. If the device is in a drawer, open the drawer.
