manualshive.com logo in svg

LG CineBeam HU80KS, Owner'S Manual

Share
Download
LG CineBeam HU80KS Owner'S Manual Download Page 36

36

ENGLISH

3 

See page 33 of “Mirror Adjustment and Precautions” to adjust the mirror 

and install the projector horizontally on a table, as shown in the picture.

You can adjust the screen angle up to 2 degrees by changing the height of 

the screws. Stand-Type installation is recommended.

• 

When the projector is installed as the Table-Type and placed upright on a 

table, the projector may fall, which may cause damage to the product or 

personal injury.

 

-

It is recommended that the product is safely laid down on the table.

• 

If you use the product without fastening the table-type screws, scratches 

may occur on the mirror case. 

• 

The handle should be positioned upward.

 

-

Otherwise, scratches may occur on the part of the product that is in 

contact with the handle.

Summary of Contents for CineBeam HU80KS























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands