manualshive.com logo in svg

LG CF3DAT, Owner'S Manual, Page: 41 / 60

Share
Download
LG CF3DAT Owner'S Manual Download Page 41

Function

41

1.  

Press the 

MENU

 button, then go to 

LOCK

 with the

 

∧, ∨, ＜, ＞ 

buttons 

and press 

OK 

.

2.  

Press the 0 - 9 buttons to enter a password.

3.  

Press the 

∧, ∨

 buttons to go to 

Set Password

 and press 

OK 

.

4.  

Press the 

∧, ∨, ＜, ＞ 

buttons to select a channel and press the 

GREEN

 (

ꔅ

)

 button. A channel is locked or unlocked.

 

ꔈ

When you enter the password for a locked channel, the channel is unlocked.

 

ꔈ

 Press the 

BACK 

button to exit the menu screen.

Enabling Block Channel

1.  

Press the 

MENU

 button. Then, move to 

LOCK

 with the 

∧, ∨, ＜, ＞

 

buttons and press the 

OK 

button.

2.  

Press the number 

0

 - 

9

 to input the password.

3.  

Press the 

∧, ∨

 buttons to move 

Movie rating 

and press the 

OK

 

button.

4.  

Move to a desired item with the 

∧, ∨

 buttons and then press the 

OK 

button.

•  

If 

Movie Rating

, 

TV Rating-Children

 or 

TV Rating-General

 is locked, 

enter the password to unlock it temporarily.

•  

If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 

and X will be blocked.

• Press 

the 

BACK

 button to exit the menu screen.

1.  

Press the 

MENU

 button. Then, move to 

LOCK

 with the 

∧, ∨, ＜, ＞

 

buttons and press the 

OK 

button.

2.  

Press the number 

0

 - 

9

 to input the password.

3.  

Press the 

∧, ∨

 buttons to move 

TV Rating-Children 

and press the 

OK

 button.

4.  

Move to a desired item with the 

∧, ∨

 buttons and then press the 

OK 

button.

• Press 

the 

BACK

 button to exit the menu screen.

Movie Rating (MPAA)

TV Rating Children

*  Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the rat-

ings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit 
only applies to movies shown on projector, not TV programs, such as soap operas.

*  Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does 

not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - 
sub menu, your children can view those programs.

Menu

Description

G

General audience

PG

Parental guidance suggested

PG-13

Parents strongly cautioned

R

Restricted

NC-17

No one 17 and under admitted

X

Adult only

Blocking Off

Permits all programs

Menu

Description

Age

applies to TV-Y, TV-Y7

Fantasy Violence applies to TV-Y7

ꔂ 

Move  

ꔉ 

OK

LOCK

Lock System: Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

ꔂ 

Move  

ꔉ 

OK

LOCK

Lock System: Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

ꔂ 

Move  

ꔉ 

OK

LOCK

Lock System: Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Summary of Contents for CF3DAT





























































Reviews:

No comments