background image

CAUTION :

The laser used in the CD-R/RW drive can damage your eyes. 
Do not attempt to open the cover.
To reduce the risk of electric shock, do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.

Use of controls or performance of procedures other than those specified
here in may result in hazardous radiation exposure.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance

to rain or moisture

PC DOS is a trademark of IBM Inc.

Adaptec and the Adaptec logo are trademarks of the Adaptec Corporation.

MS-DOS, Windows, and Windows

®

95 are trademarks registered in the United States

and other countries by the Microsoft Corporation.

The company names and product names written in this manual are trademarks or

registered trademarks of the respective companies.

This unit uses CD-RW discs with the following mark.

This unit uses CD-R discs with the following mark.

This unit uses CD-ROM discs with the following mark

When you use this unit as a CD player, use compact discs
with the following mark.

COMPACT

COMPACT

COMPACT

DIGITAL AUDIO

Recordable

COMPACT

ReWritable

ii

English

Summary of Contents for CED-8120B - - CD-RW Drive























Reviews: