background image

ENGLISH

Owner's Manual 

11

Cooling

Auto

Changeover

Healthy

Dehumidification

Heating

(Heat pump model only) Air Circulation

Natural Wind

Step2(Medium)

Step1(Low)

Step3(High)

Auto Operation (Multi Air conditioner)

Auto Changeover (Single Air conditioner)

ON/OFF

MODE

TEMP

FAN SPEED

Operating Instructions

Press the ON/OFF BUTTON to turn the unit on. 
The unit will respond with a beep.

Open the cover of the remote controller and press the operation mode button. Each time
the button is pressed, the operation mode is shifted in the direction of the arrow.

For cooling or heating operation set the desired indoor
temperature by pressing the ROOM TEMPERATURE
SETTING BUTTONS.
For cooling the temperature can be set within 18°C~30°C and
for heating the temperature range is 16°C~30°C.

Set the fan speed with the remote controller. You can select the fan speed in four Steps : low,
medium, high and natural wind by pressing the INDOOR FAN SPEED SELECTION BUTTON.
Each time the button is pressed, the fan speed mode is shifted in the direction of the arrow.

1

2

3

4

Natural wind

For fresher feeling, press the INDOOR FAN SPEED SELECTION BUTTON and set to Natural wind mode. 
In this mode, the wind blows like a natural breeze by automatically changing fan speed.

Operation Mode

Summary of Contents for CC07AWR






















Reviews: