LG BU50NST Owner'S Manual Download Page 39

Page: 39 / 152

ENGLISH

NOTE

When Using the HDBaseT

•

For more information about how to connect an external device to an HDBaseT

TX device (the transmitter), refer to the operator’s manual provided with the

HDBaseT TX device (the transmitter).

•

To comply with the specifications of the product, use a CAT.6 FTP cable.

•

If you do not use a CAT.6 FTP cable, the screen may not display or a connection

error may occur.

•

CAT.6 FTP can be used up to 100 m (328.0 feet).

•

CAT.5E lower rating is not supported HDBaseT. CAT.5E supports 70 m (229.6

feet).

•

If HDBaseT cable is used, the cable should not be bent or rolled, it should be

straight.

•

HDBaseT cables should not touch the power 110 V/220 V cables. It should not

be in the water.

•

Depending on the HDBaseT transmitting device, the screen of external devices

may not be displayed.

Summary of Contents for BU50NST

























































































































































Search results

Summary of Contents for BU50NST

Reviews:

Brands by name

Popular brands

LG BU50NST, Owner'S Manual

Search results

Summary of Contents for BU50NST

Reviews:

Brands by name

Popular brands