6
Maintenance
•
Do not clean the appliance by spraying water directly onto the product.
•
Before cleaning or performing maintenance, disconnect the power supply and
wait until the fan stops.
Technical Safety
•
Installation or repairs made by unauthorized persons can pose hazards to you
and others.
•
The information contained in the manual is intended for use by a qualified
service technician who is familiar with the safety procedures and equipped with
the proper tools and test instruments.
•
Failure to read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
•
The appliance shall be installed in accordance with national wiring regulations.
•
When the power cord is to be replaced, the replacement work shall be
performed by authorized personnel using only genuine replacement parts.
•
This appliance must be properly grounded to minimize risk of electric shock.
•
Do not cut or remove the grounding prong from the power plug.
•
Attaching the adapter ground terminal to the wall receptacle cover screw does
not ground the appliance unless the cover screw is metal, uninsulated, and the
wall receptacle is grounded through house wiring.
•
If you have any doubt whether the air conditioner is properly grounded, have the
wall receptacle and circuit checked by a qualified electrician.
•
The refrigerant and insulation blowing gas used in the appliance require special
disposal procedures. Consult a service agent or a similarly qualified person
before disposing of them.
•
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agents or similarly qualified person in order to avoid a hazard.
