LG AU810PW-EU Owner'S Manual Download

Page: 39 / 169

ENGLISH

To Register the Magic Lighting Remote

You must pair the Magic Lighting Remote with the projector to use it.
Pair the Magic Lighting Remote prior to use as follows.

Put batteries into the Magic Lighting Remote and turn the Projector on.

Point the Magic Lighting Remote at your projector and press the

Wheel

(OK)

on the remote control.

•

If the projector fails to register the Magic Lighting Remote, try again after

turning the projector off and back on.

To Re-register the Magic Lighting Remote

Press the

and

buttons at the same time, for five seconds, to unpair

the Magic Lighting Remote with your projector.

Press the

Wheel (OK)

button towards the projector to re-register the

Magic Lighting Remote.

•

Pressing and holding the

button will let you cancel and re-register Magic

Lighting Remote at once.

Summary of Contents for AU810PW-EU










































































































































































Search results

Summary of Contents for AU810PW-EU

Reviews:

Related manuals for AU810PW-EU

Brands by name

Popular brands

LG AU810PW-EU, Owner'S Manual

Search results

Summary of Contents for AU810PW-EU

Reviews:

Related manuals for AU810PW-EU

Brands by name

Popular brands