26
MAINTENANCE
MAINTENANCE
Cleaning the Filters
1. Turn off the power and unplug the appliance.
Then pull open the rear panel.
2. Pull the filter set by the top handle to remove it from the appliance.
• Dust may accumulate on the filter net.
• Before disassembling filter set, move the filters to a convenient location
for vacuuming.
• Place a newspaper or paper towel down to catch any loose dust.
3. While holding the filter case over the newspaper, push up
on the sides of the pre-filter to separate it from the filter
set.
Clean the pre-filter using a vacuum cleaner or brush. If
the filter is very dirty, rinse it under running water after
cleaning it with a vacuum cleaner.
• Allow pre-filter to dry completely, out of direct sunlight, before reinstalling.
• Do not use pre-filter while damp. Doing so may cause odor.
• Do not operate air purifier without pre-filter installed.
• Do not use water that is hotter than 40°C to avoid product deformation or failure.
Caution
!
